NIBOVI Dune Dust Extractor

Your complete guide to setting up, using, and caring for the NIBOVI Dune Dust Extractor.

The NIBOVI Dune is a premium nail dust extractor built for professional nail technicians who value a clean, breathable workspace, high performance, and enduring quality. Powered by a 58 W high-performance motor and a true HEPA filter, it captures fine dust and skin debris to keep both you and your clients safe throughout every service. This guide walks you through setup, everyday use, and the care routine that keeps it performing at its best.

What's in the Box

NIBOVI Dune dust extractor unit
1x HEPA filter
Figure-of-eight power cable

The Specs at a Glance

Motor: 58 W high-performance motor

Suction speed: 3.5 m/s for instant dust capture

Suction control: Dial-controlled, adjustable

Filtration: True HEPA filter — traps 99.97% of airborne particles as small as 0.3 microns (fine dust, product fumes, skin debris)

Filter included: 1x HEPA filter

Power: Mains powered, for uninterrupted, consistent performance

Supply voltage: 220 V / 50 Hz and 110 V

Noise level: 85 dB

Shell & grill: Acetone-resistant for long-lasting durability

Dimensions: 29 cm (L) x 18 cm (W) x 7.6 cm (H)

Finish: Signature NIBOVI gold

Warranty: 5-year manufacturer warranty

Getting Started

Setting up

Place the Dune on a stable, flat section of your nail desk where it sits close to your working area for the best dust capture.
Connect the figure-of-eight power cable to the unit, then plug into a wall or extension socket.
Switch on and select your suction level using the dial.

Cable note: The Dune uses a figure-of-eight power connector designed to be connected and left in place. Where you can, leave the cable plugged into the unit and simply switch off at the wall or extension socket when it's not in use. The connector isn't built for repeated removal and can loosen over time.

Positioning for best capture

Keep the unit directly in front of or beside your working hand so dust is drawn in at the source.
Make sure the grill and airflow path are unobstructed.
The Dune suits any nail system, so use it for every service where dust or filings are produced.

Using the Dune

Dial-controlled suction: Turn the dial to increase or decrease suction. Use higher suction for heavier de-bulking and acrylic removal, and lower settings for lighter detailing work.
Run it throughout the service: Switch the extractor on before you begin filing and keep it running for the full service to capture dust as it's created.
Pair with good technique: Work close to the unit and keep the dust at the source — the closer the work to the intake, the more it captures.

Tip: Because the Dune is mains powered, it delivers consistent suction for as long as you need it — there's no battery to fade mid-service.

Cleaning & Care

To maintain peak performance and hygiene, follow these recommended steps.

Grill cleaning

Remove the grill from the unit.
Wash it gently in warm, soapy water, then rinse and dry promptly rather than leaving it to soak.
Make sure it is completely dry before you reinstall it.

HEPA filter maintenance

Check the filter regularly for dust build-up.
Tap it gently to release loose particles. For a deeper clean, use a soft brush or a low-power vacuum.
Do not soak the filter — moisture can damage its structure and reduce how well it works.
Only ever use one side of the filter — do not flip or reverse it.
Depending on how often you work and how many clients you see, plan to replace the filter every two to three months. (Replacement filters are available on the NIBOVI website.)

Exterior cleaning

Wipe the outside down with a soft, damp cloth.
Use only non-abrasive, acetone-safe cleaners.
Make sure the unit is fully dry before reconnecting the power.

Power cable care

Leave the figure-of-eight connector plugged into the unit where possible, and switch off at the socket instead of unplugging at the extractor.
Try not to unplug the cable from the extractor itself on a regular basis — the connector isn't built for repeated removal and can loosen over time.
If you do need to disconnect it, hold the connector firmly rather than pulling on the cable, and reinsert it gently until it is fully seated.

Routine Maintenance

Keep to the two-to-three-month filter replacement schedule — this is also a condition of your warranty.

Inspect the grill and intake regularly and keep them clear of build-up so airflow stays strong.

Make sure no foreign objects or liquids can enter the fan.

Keep the unit dry and store it somewhere clean when not in use.

Quick Troubleshooting

Reduced suction: Check the HEPA filter for dust build-up (tap clean or replace), and make sure the grill and intake aren't blocked.

Dust escaping onto the desk: Move the unit closer to your working hand and increase the suction dial; confirm the filter and grill are correctly seated.

Connector feels loose: Avoid repeatedly unplugging at the unit. Reinsert the figure-of-eight connector gently until fully seated and switch off at the wall instead.

Filter looks clogged quickly: Higher client volume means more frequent care — tap clean between clients and keep to the two-to-three-month replacement cycle.

Important Safety & Care Notes

Keep liquids and foreign objects away from the fan and intake.

Use only non-abrasive, acetone-safe cleaners on the shell and grill.

Always ensure the grill and unit are fully dry before reconnecting power.

Do not attempt unauthorised repairs — this will void your warranty.

Warranty & Returns

5-Year Manufacturer's Warranty

Every Dune extractor is covered by a 5-year manufacturer's warranty from the date of purchase. Your warranty card must be completed in full and include the serial number, the date of sale, and the seller's signature.

Warranty coverage includes:

The electronic components of the device.
Shipping costs for warranty cases (covered by the seller).
If the product is resold, the warranty remains valid only for the original warranty card holder.

The warranty does not apply to:

Damage caused by foreign objects or liquids entering the fan.
Failure to follow the recommended filter replacement schedule (every 2–3 months via the NIBOVI website).
Evidence of unauthorised repairs.
Damage from natural disasters.

Returns

Change of mind: If purchased through the website and unopened and unused, you may return it within 14 daysof receiving your order, in its original packaging, in line with the Consumer Contracts Regulations.
Once opened and used, returns cannot be accepted for hygiene and safety reasons, unless the item is deemed faulty.
Faults: If you believe your Dune is faulty, contact NIBOVI within 30 days of receiving your order with a written description of the issue, supporting photos or video, and your original order number and warranty number. If found faulty, NIBOVI will arrange a replacement, repair, or full refund as appropriate.

Please note: perceived loudness, size, or user preference does not constitute a fault. All specifications — including noise level, suction speed, and dimensions — are stated on the product page to help you make an informed decision.

📩 customercare@nibovi.com

This does not affect your statutory rights under UK consumer law.

Cared for properly — with regular filter changes and a clear intake — your Dune will keep your workspace clean and breathable service after service.

NIBOVI Dune Dust Extractor - How To Guide